pushover problem
pushover problem
Could you tell me why my pushover analysis is wrong?
- Attachments
-
- test-1.rar
- (411.25 KiB) Downloaded 147 times
Re: pushover problem
You are using some strange settings, especially the test command. a tolerance of 0.1 is too large and allows a too high error.
Also using an adaptive time step can help in non-convergent situations.
Finally, I would suggest to mesh walls. 1 shell element per wall is not enough
Also using an adaptive time step can help in non-convergent situations.
Finally, I would suggest to mesh walls. 1 shell element per wall is not enough
- Attachments
-
- test-1.zip
- (574.43 KiB) Downloaded 133 times