ZeroLength Element bug
Posted: Wed Feb 24, 2021 2:45 pm
Hi!
I'm using STKO v2.0 and when I create a ZeroLength Element with an elastic material assigned to ZeroLength material with the 6 dof activated, dof 6 doesn't appear activated. The same result is obtained activating dir1, dir2, dir3, dir4, dir5 and dir6 than activating dir1, dir2, dir3, dir4, dir5 and dir6
activating dir1, dir2, dir3, dir4 and dir5 --->correct!
element zeroLength 20935 320 3851 -mat 9 9 9 9 9 -dir 1 2 3 4 5 -orient 1.0 0.0 0.0 0.0 1.0 0.0
activating dir1, dir2, dir3, dir4, dir5 and dir6 --->incorrect!
element zeroLength 20935 320 3851 -mat 9 9 9 9 9 -dir 1 2 3 4 5 -orient 1.0 0.0 0.0 0.0 1.0 0.0
One dir and one mat are missing!
I'm using STKO v2.0 and when I create a ZeroLength Element with an elastic material assigned to ZeroLength material with the 6 dof activated, dof 6 doesn't appear activated. The same result is obtained activating dir1, dir2, dir3, dir4, dir5 and dir6 than activating dir1, dir2, dir3, dir4, dir5 and dir6
activating dir1, dir2, dir3, dir4 and dir5 --->correct!
element zeroLength 20935 320 3851 -mat 9 9 9 9 9 -dir 1 2 3 4 5 -orient 1.0 0.0 0.0 0.0 1.0 0.0
activating dir1, dir2, dir3, dir4, dir5 and dir6 --->incorrect!
element zeroLength 20935 320 3851 -mat 9 9 9 9 9 -dir 1 2 3 4 5 -orient 1.0 0.0 0.0 0.0 1.0 0.0
One dir and one mat are missing!