Applying geometrical imperfections

Post Reply
jandre
Posts: 4
Joined: Mon Jul 05, 2021 4:56 pm

Applying geometrical imperfections

Post by jandre » Mon Jul 05, 2021 4:57 pm

Dear All,
I'm very new to STKO and opensees. In a general way can you please guide me on how to use an eigenvalue analysis to apply initial imperfections to a shell model?
Thank you very much for your help.
Kind regards,
Joao

marafini.f
Posts: 272
Joined: Fri Nov 13, 2020 1:52 pm

Re: Applying geometrical imperfections

Post by marafini.f » Tue Jul 06, 2021 8:16 am

Dear jandre,
it is possible to do what you are asking. Do you want to apply an imperfection proportional to the eigenvectors or just a random one?
Francesca

jandre
Posts: 4
Joined: Mon Jul 05, 2021 4:56 pm

Re: Applying geometrical imperfections

Post by jandre » Tue Jul 06, 2021 9:53 am

Dear Francesca,

Hello, thank you for the reply.
I'd like to apply a initial imperfection proportional to a eigenvector.
I presume that it could be possible to apply this as an initial condition of the system.
Thank you very much!
Joao

marafini.f
Posts: 272
Joined: Fri Nov 13, 2020 1:52 pm

Re: Applying geometrical imperfections

Post by marafini.f » Thu Jul 08, 2021 4:37 pm

Dear Joao,

yes it is possible to do that. You can run an eigenvalue analysis in STKO, then save the eigenvector results with the related indices of the nodes and input them as imposed displacements once again in your initial model, as initial imperfections, in the proportion that you prefer.

If you tell on which kind of model you want to perform this I can help you set up a procedure to do it. First, we would need a working model, with correct mass assignments and running eigenvalue analysis.

Let me know more I am curious :geek:
Francesca

Post Reply