static analysis error

Post Reply
Yulu Liu
Posts: 22
Joined: Fri Nov 15, 2019 6:31 am

static analysis error

Post by Yulu Liu » Tue Nov 19, 2019 3:24 pm

I am running the static analysis.
My model uses special purpose_beamsectionproperty with fibre section.
The error is shown in the photo attached.
What does it means please?
Attachments
999.png
999.png (32.34 KiB) Viewed 1323 times
d4008a7f86539f7d5290103d9b0c4e1.png
d4008a7f86539f7d5290103d9b0c4e1.png (32.34 KiB) Viewed 1323 times

Yulu Liu
Posts: 22
Joined: Fri Nov 15, 2019 6:31 am

Re: static analysis error

Post by Yulu Liu » Tue Nov 19, 2019 3:42 pm

the same as
Attachments
666.png
666.png (131.61 KiB) Viewed 1320 times

STKO Team
Posts: 220
Joined: Tue Oct 29, 2019 8:45 am

Re: static analysis error

Post by STKO Team » Tue Nov 19, 2019 4:04 pm

Dear Yulu Liu,

that error is saying that the flexibility matrix of one of your sections is singular. In case of fiber sections, make sure material properties are properly defined, i.e. non zero Young modulus, strengths, etc...

Yulu Liu
Posts: 22
Joined: Fri Nov 15, 2019 6:31 am

Re: static analysis error

Post by Yulu Liu » Mon Jan 13, 2020 2:33 pm

Hi~
I assign the truss element to one brace, while the all beams and columns are assigned forceBeamColumn element with special_purpose BeamSecionProperty of fiber. When I run the analysis, there comes the error shown as the attached photo. Is there anything wrong? How to make it?
Thank you a lot.
Attachments
666.png
666.png (65.77 KiB) Viewed 1143 times

STKO Team
Posts: 220
Joined: Tue Oct 29, 2019 8:45 am

Re: static analysis error

Post by STKO Team » Wed Jan 15, 2020 10:54 am

The error is related to some of the truss elements. It looks like you did not assign a special_purpose.truss physical property.

If you still have problems, please send us the .scd file

Post Reply