Mesh problem

Post Reply
AntoMarinelli
Posts: 43
Joined: Thu Aug 05, 2021 8:53 am

Mesh problem

Post by AntoMarinelli » Fri Oct 15, 2021 8:27 am

Dear STKO team,
I have a problem with the mesh generation. In this beam I modeled the anchorage plate on each side of the element. The problem is that I need to generate a structurate quad mesh for the shell but on the right the program generates a mesh that is formed by one triangular and others rectangles while on the left I have only rectangular. The elements are the same.
I attached the model.
Thanks in advance

Regards

Antonella
Attachments
H1500_FRC50_beam.rar
(361.63 KiB) Downloaded 16 times

LuisB
Posts: 9
Joined: Tue Sep 07, 2021 12:21 pm

Re: Mesh problem

Post by LuisB » Fri Oct 15, 2021 11:30 am

Hi AntoMarinelli,

I opened your model and I solved the issue by remodelling the anchorages plates. Here is the model!
H1500_FRC50_beam.rar
(362.35 KiB) Downloaded 27 times
Regards,
Luis

baovietgps
Posts: 2
Joined: Fri Nov 12, 2021 3:13 am

Re: Mesh problem

Post by baovietgps » Fri Nov 12, 2021 3:20 am

I also have the same problem

marafini.f
Posts: 350
Joined: Fri Nov 13, 2020 1:52 pm

Re: Mesh problem

Post by marafini.f » Sun Nov 14, 2021 11:17 am

Hi baovietgps,
can you attach your model so we can check out your problem?

Post Reply