two node link element modeling error

Post Reply
zly123
Posts: 11
Joined: Tue Feb 20, 2024 1:01 pm

two node link element modeling error

Post by zly123 » Thu Apr 11, 2024 2:17 pm

I use two node link element to establish a MDOF model,but it can't analysis.
Attachments
93766543691c75bc9f514e00e5bc136.png
93766543691c75bc9f514e00e5bc136.png (62.4 KiB) Viewed 130 times
45c3288088ebd08783b8aefec76bfe7.png
45c3288088ebd08783b8aefec76bfe7.png (94.28 KiB) Viewed 130 times

zly123
Posts: 11
Joined: Tue Feb 20, 2024 1:01 pm

Re: two node link element modeling error

Post by zly123 » Thu Apr 11, 2024 3:03 pm

I only build point and use node to node interaction,now it can analysis but it's also wrong.
Attachments
da7898bf3a84515a70d157f3bdfc26c.png
da7898bf3a84515a70d157f3bdfc26c.png (154.92 KiB) Viewed 129 times

kesavapraba
Posts: 301
Joined: Sat Mar 28, 2020 2:25 pm

Re: two node link element modeling error

Post by kesavapraba » Mon Apr 15, 2024 3:47 pm

Hi, the error in STKO suggests that you have assigned the element on edges but not on node-node interaction. I can see in the attached figure there are some edges! Please check if you are assigning the element to the interactions.
:: With best wishes ::
Prabakaran Kesavan

Post Reply