MPCRecorder Error: cannot write model

Hello! In this section we'll talk about the post processing module and the data visualization.
Post Reply
Posts: 54
Joined: Wed Jun 08, 2022 11:32 am

MPCRecorder Error: cannot write model

Post by amb_1 » Thu Jun 29, 2023 9:56 am

Dear STKO Team:
Thanks for your help, I have encountered a new problem with the MPCRecorder command, when I use the default way it works fine and records the whole model, however, when I just want to record the core area, it does not work. I checked the relevant information in the forum "viewtopic.php?f=29&t=1609&p=2064&hilit= ... ions#p2064" and the problem may arise from using MoelSubset, however For complex models, MoelSubset, is a must. I have provided a preliminary model, can you give me some advice?
3.png (171.8 KiB) Viewed 3721 times
4.png (130.47 KiB) Viewed 3721 times
Last edited by amb_1 on Mon Sep 18, 2023 5:50 am, edited 3 times in total.

Posts: 2247
Joined: Tue Oct 29, 2019 8:45 am

Re: MPCRecorder Error: cannot write model

Post by STKO Team » Fri Sep 08, 2023 10:23 am

You have to add the model subset before the region, otherwise OpenSees will put nothing in that region if the elements are not yet created
subset.png (23.89 KiB) Viewed 3004 times

Post Reply