I can not see the fiber color map results

Hello! In this section we'll talk about the post processing module and the data visualization.
Post Reply
mcelikk
Posts: 2
Joined: Wed Jan 05, 2022 8:36 am

I can not see the fiber color map results

Post by mcelikk » Wed Jan 05, 2022 8:51 am

Dear STKO,

The post processor does not show the fiber color map results. I tried to rebuild the model many times but can't get any improvement.

I attached the file, any help would be much appreciated.

Best regards,

Murat
Attachments
test_column_shear(ok).rar
(101.82 KiB) Downloaded 30 times

STKO Team
Posts: 1346
Joined: Tue Oct 29, 2019 8:45 am

Re: I can not see the fiber color map results

Post by STKO Team » Wed Jan 05, 2022 9:18 am

Recently the OpenSees' developers changed the way the section aggregator handles the results (unfortunately).
Before you could as for section.fiber.stress.

Now, since the fiber section is a section inside another section (aggregator), they changed it to:
section.section.fiber.stress

To solve this you need to: here is what I changed in the recorder:
section_section.png
section_section.png (43.52 KiB) Viewed 434 times

mcelikk
Posts: 2
Joined: Wed Jan 05, 2022 8:36 am

Re: I can not see the fiber color map results

Post by mcelikk » Wed Jan 05, 2022 10:47 am

This was very helpful! Thank you.

Best regards,

Murat,

STKO Team
Posts: 1346
Joined: Tue Oct 29, 2019 8:45 am

Re: I can not see the fiber color map results

Post by STKO Team » Wed Jan 05, 2022 10:55 am

You're welcome

Post Reply